Home / Resources / After-sales support

Quick fixes.

One-step fixes for the most common site issues. If a problem continues, or a part is damaged, stop using that part and raise a support request.

The bench rocks or wobbles

Likely cause: The floor is uneven, or the bench was moved.

  1. Put a spirit level on the worktop, along its length and then across its depth.
  2. Turn the glide under the low corner until the bubble is centred.
  3. Press down on each corner and adjust the glide under any corner that lifts.

A castor won't lock, or a trolley drifts

Likely cause: The castors are not locked, or swarf and debris are caught in them.

  1. Press each castor's brake down firmly before working.
  2. Clear swarf, dust and packing debris from the wheels.
  3. If a brake still slips, stop using the trolley and raise a request.

A drawer is out of line or hard to open

Likely cause: The drawer is overloaded, or there is debris in the slides.

  1. Remove some weight and spread heavy items across lower drawers.
  2. Clean the slides.
  3. Close and reopen the drawer fully to check it runs smoothly.

Static shocks at an ESD bench

Likely cause: The mat or wrist strap is not connected.

  1. Check the cords from the mat and wrist strap to the 3-way connector.
  2. Check the grounding plug is in the facility's earth point.
  3. Wear the strap snug against bare skin.

A missing or damaged part has no self-service fix. Raise a request with photos straight away.

Keep it running.

A five-minute weekly check prevents most of these issues.

  • The bench is level and does not rock
  • Shelves and accessories are fully seated in their slots
  • Castors lock firmly
  • Power cords, rails and outlet strips are undamaged
  • Castors and slides are free of swarf, dust and packing debris

Still need help?

Raise one support request by form, email, phone or WhatsApp. You'll get one ticket number, tracked until it is closed.