Protect electronic assemblies from static damage at the bench
An ESD-controlled bench with grounding built in, not added later.

The problem
Boards pass inspection at the bench and fail later in the field. Static damage is invisible when it happens, so the cause is hard to trace back to the station.
Why it happens
Ordinary laminate worktops, ungrounded shelves and loose accessories let charge build up where sensitive parts are handled.
How the setup comes together
- Mark the ESD protected area and the stations inside it.
- Fit PELW worktops with wrist-strap anchors and a common grounding point.
- Mount the power rail and instrument shelf so cables stay off the worktop.
- Keep sensitive parts in ESD bins and drawers between operations.
What changes
Sensitive parts are handled on a grounded surface from kit to finished board, and the station is ready for an ESD audit.
Related solutions.

Stop operators searching for tools at the assembly station
Give every tool a fixed place within arm's reach of the operator.
Manufacturing, Automotive, Aerospace & aviation
Keep sub-assembly work in progress staged and traceable
Separate zones for parts in, work in progress and finished modules.
Manufacturing, Automotive
Keep rework and rejected parts away from good production
A dedicated rework bench with clear segregation for each status.
Manufacturing, Automotive, Oil & gasWant this setup in your space?
Share your layout, the work done there and how many people use it. We'll size this solution from standard modules.
