Most shop floors aren't flat. Place the bench, level it both ways on its glides, then run a quick pre-use check.
We're adding new videos regularly. For product walkthroughs and installations, subscribe to our YouTube channel.
Quick tips
Step-by-step videos of about three minutes each. Set up, load, fit and look after your workstations the right way, from the first day of installation.
Know the rating of the bench and every accessory, spread heavy loads or put them over a leg frame or cabinet, and keep heavy items low.
Get boxes off the worktop: understand starter and adder frames, plan accessories by reach, and hook each one into the same notch on both frames.
A two-minute routine for every shift: test your wrist strap, follow the grounding path, and keep the mat clean and clear.
Sort, set in order with partitions and label every compartment, then shine, standardise and sustain with a quick check each shift.
Load at the back and pick at the front, keep one part number per lane, and stay within the ratings so gravity rotates your stock.
Conceptual learning
Get familiar with workspace terms and choices through 37 one-minute concept videos, from load ratings and ESD protection to reach zones and layout planning.
UDL means Uniformly Distributed Load: the weight a worktop can carry when it is spread evenly from end to end. Concentrate the same weight in one spot and the safe limit drops.
A spark too small to see or feel can kill or weaken a chip. How static builds up, and why a damaged board can pass today and fail later.
Sloped roller shelves that use gravity to bring the oldest stock forward first, so nothing hides at the back.
Let's plan the right setup for your team.
Share your space, the work done in it and any drawings you have. We'll suggest a configuration and a layout.
